How do I configure a host-based firewall called Netfilter (iptables) under CentOS / RHEL / Fedora / Redhat Enterprise Linux?
Netfilter is a host-based firewall for Linux operating systems. It is
included as part of the Linux distribution and it is activated by
default. This firewall is controlled by the program called iptables.
Netfilter filtering take place at the kernel level, before a program can
even process the data from the network packet.
Iptables Config File
The default config files for RHEL / CentOS / Fedora Linux are:
- /etc/sysconfig/iptables - The system scripts that activate the firewall by reading this file.
Task: Display Default Rules
Type the following command:
iptables --line-numbers -n -L
Sample outputs:
Chain INPUT (policy ACCEPT)
num target prot opt source destination
1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0
Chain FORWARD (policy ACCEPT)
num target prot opt source destination
1 RH-Firewall-1-INPUT all -- 0.0.0.0/0 0.0.0.0/0
Chain OUTPUT (policy ACCEPT)
num target prot opt source destination
Chain RH-Firewall-1-INPUT (2 references)
num target prot opt source destination
1 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0
2 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 255
3 ACCEPT udp -- 0.0.0.0/0 224.0.0.251 udp dpt:5353
4 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 udp dpt:53
5 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED
6 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22
7 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:53
8 REJECT all -- 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited
Task: Turn On Firewall
Type the following two commands to turn on firewall:
chkconfig iptables on
service iptables start
# restart the firewall
service iptables restart
# stop the firewall
service iptables stop
Understanding Firewall
There are total 4 chains:
- INPUT
- The default chain is used for packets addressed to the system. Use
this to open or close incoming ports (such as 80,25, and 110 etc) and ip
addresses / subnet (such as 202.54.1.20/29).
- OUTPUT
- The default chain is used when packets are generating from the
system. Use this open or close outgoing ports and ip addresses /
subnets.
- FORWARD - The default chains is used
when packets send through another interface. Usually used when you setup
Linux as router. For example, eth0 connected to ADSL/Cable modem and
eth1 is connected to local LAN. Use FORWARD chain to send and receive
traffic from LAN to the Internet.
- RH-Firewall-1-INPUT - This is a user-defined custom chain. It is used by the INPUT, OUTPUT and FORWARD chains.
Packet Matching Rules
- Each packet starts at the first rule in the chain .
- A packet proceeds until it matches a rule.
- If a match found, then control will jump to the specified target (such as REJECT, ACCEPT, DROP).
Target Meanings
- The target ACCEPT means allow packet.
- The target REJECT means to drop the packet and send an error message to remote host.
- The target DROP means drop the packet and do not send an error message to remote host or sending host.
/etc/sysconfig/iptables
Edit /etc/sysconfig/iptables, enter:
# vi /etc/sysconfig/iptables
You will see default rules as follows:
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:RH-Firewall-1-INPUT - [0:0]
-A INPUT -j RH-Firewall-1-INPUT
-A FORWARD -j RH-Firewall-1-INPUT
-A RH-Firewall-1-INPUT -i lo -j ACCEPT
-A RH-Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT
-A RH-Firewall-1-INPUT -p udp --dport 5353 -d 224.0.0.251 -j ACCEPT
-A RH-Firewall-1-INPUT -p udp -m udp --dport 53 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 53 -j ACCEPT
-A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited
COMMIT
Drop All Traffic
Find lines:
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
Update as follows to change the default policy to DROP from ACCEPT for the INPUT and FORWARD built-in chains:
:INPUT DROP [0:0]
:FORWARD DROP [0:0]
Log and Drop Spoofing Source Addresses
Append the following lines before final COMMIT line:
-A INPUT -i eth0 -s 10.0.0.0/8 -j LOG --log-prefix "IP DROP SPOOF "
-A INPUT -i eth0 -s 172.16.0.0/12 -j LOG --log-prefix "IP DROP SPOOF "
-A INPUT -i eth0 -s 192.168.0.0/16 -j LOG --log-prefix "IP DROP SPOOF "
-A INPUT -i eth0 -s 224.0.0.0/4 -j LOG --log-prefix "IP DROP MULTICAST "
-A INPUT -i eth0 -s 240.0.0.0/5 -j LOG --log-prefix "IP DROP SPOOF "
-A INPUT -i eth0 -d 127.0.0.0/8 -j LOG --log-prefix "IP DROP LOOPBACK "
-A INPUT -i eth0 -s 169.254.0.0/16 -j LOG --log-prefix "IP DROP MULTICAST "
-A INPUT -i eth0 -s 0.0.0.0/8 -j LOG --log-prefix "IP DROP "
-A INPUT -i eth0 -s 240.0.0.0/4 -j LOG --log-prefix "IP DROP "
-A INPUT -i eth0 -s 255.255.255.255/32 -j LOG --log-prefix "IP DROP "
-A INPUT -i eth0 -s 168.254.0.0/16 -j LOG --log-prefix "IP DROP "
-A INPUT -i eth0 -s 248.0.0.0/5 -j LOG --log-prefix "IP DROP "
Log And Drop All Traffic
Find the lines:
-A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited
COMMIT
Update it as follows:
-A RH-Firewall-1-INPUT -j LOG
-A RH-Firewall-1-INPUT -j DROP
COMMIT
Open Port
To open port 80 (Http server) add the following before COMMIT line:
-A RH-Firewall-1-INPUT -m tcp -p tcp --dport 80 -j ACCEPT
To open port 53 (DNS Server) add the following before COMMIT line:
-A RH-Firewall-1-INPUT -m tcp -p tcp --dport 53 -j ACCEPT
-A RH-Firewall-1-INPUT -m udp -p tcp --dport 53 -j ACCEPT
To open port 443 (Https server) add the following before COMMIT line:
-A RH-Firewall-1-INPUT -m tcp -p tcp --dport 443 -j ACCEPT
To open port 25 (smtp server) add the following before COMMIT line:
-A RH-Firewall-1-INPUT -m tcp -p tcp --dport 25 -j ACCEPT
Only allow SSH traffic From 192.168.1.0/24
-A RH-Firewall-1-INPUT -s 192.168.1.0/24 -m state --state NEW -p tcp --dport 22 -j ACCEPT
Enable Printing Access For 192.168.1.0/24
-A RH-Firewall-1-INPUT -s 192.168.1.0/24 -p udp -m udp --dport 631 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.1.0/24 -p tcp -m tcp --dport 631 -j ACCEPT
Allow Legitimate NTP Clients to Access the Server
-A RH-Firewall-1-INPUT -s 192.168.1.0/24 -m state --state NEW -p udp --dport 123 -j ACCEPT
Open FTP Port 21 (FTP)
-A RH-Firewall-1-INPUT -m state --state NEW -p tcp --dport 21 -j ACCEPT
Save and close the file. Edit /etc/sysconfig/iptables-config, enter:
# vi /etc/sysconfig/iptables-config
Make sure ftp module is loaded with the space-separated list of modules:
IPTABLES_MODULES="ip_conntrack_ftp"
To restart firewall, type the following commands:
# service iptables restart
# iptables -vnL --line-numbers
Edit /etc/sysctl.conf For DoS and Syn Protection
Edit /etc/sysctl.conf to defend against certain types of attacks and append / update as follows:
net.ipv4.conf.all.log_martians = 1
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.conf.default.accept_redirects = 0
net.ipv4.conf.default.secure_redirects = 0
net.ipv4.icmp_echo_ignore_broadcasts = 1
#net.ipv4.icmp_ignore_bogus_error_messages = 1
net.ipv4.tcp_syncookies = 1
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.default.rp_filter = 1
See previous FAQ, "
Linux Kernel /etc/sysctl.conf Security Hardening" for more details.
Alternate Configuration Option
You can skip /etc/sysconfig/iptables file and create a shell script from scratch as follows:
#!/bin/bash
# A sample firewall shell script
IPT="/sbin/iptables"
SPAMLIST="blockedip"
SPAMDROPMSG="BLOCKED IP DROP"
SYSCTL="/sbin/sysctl"
BLOCKEDIPS="/root/scripts/blocked.ips.txt"
# Stop certain attacks
echo "Setting sysctl IPv4 settings..."
$SYSCTL net.ipv4.ip_forward=0
$SYSCTL net.ipv4.conf.all.send_redirects=0
$SYSCTL net.ipv4.conf.default.send_redirects=0
$SYSCTL net.ipv4.conf.all.accept_source_route=0
$SYSCTL net.ipv4.conf.all.accept_redirects=0
$SYSCTL net.ipv4.conf.all.secure_redirects=0
$SYSCTL net.ipv4.conf.all.log_martians=1
$SYSCTL net.ipv4.conf.default.accept_source_route=0
$SYSCTL net.ipv4.conf.default.accept_redirects=0
$SYSCTL net.ipv4.conf.default.secure_redirects=0
$SYSCTL net.ipv4.icmp_echo_ignore_broadcasts=1
#$SYSCTL net.ipv4.icmp_ignore_bogus_error_messages=1
$SYSCTL net.ipv4.tcp_syncookies=1
$SYSCTL net.ipv4.conf.all.rp_filter=1
$SYSCTL net.ipv4.conf.default.rp_filter=1
$SYSCTL kernel.exec-shield=1
$SYSCTL kernel.randomize_va_space=1
echo "Starting IPv4 Firewall..."
$IPT -F
$IPT -X
$IPT -t nat -F
$IPT -t nat -X
$IPT -t mangle -F
$IPT -t mangle -X
# load modules
modprobe ip_conntrack
[ -f "$BLOCKEDIPS" ] && BADIPS=$(egrep -v -E "^#|^$" "${BLOCKEDIPS}")
# interface connected to the Internet
PUB_IF="eth0"
#Unlimited traffic for loopback
$IPT -A INPUT -i lo -j ACCEPT
$IPT -A OUTPUT -o lo -j ACCEPT
# DROP all incomming traffic
$IPT -P INPUT DROP
$IPT -P OUTPUT DROP
$IPT -P FORWARD DROP
if [ -f "${BLOCKEDIPS}" ];
then
# create a new iptables list
$IPT -N $SPAMLIST
for ipblock in $BADIPS
do
$IPT -A $SPAMLIST -s $ipblock -j LOG --log-prefix "$SPAMDROPMSG "
$IPT -A $SPAMLIST -s $ipblock -j DROP
done
$IPT -I INPUT -j $SPAMLIST
$IPT -I OUTPUT -j $SPAMLIST
$IPT -I FORWARD -j $SPAMLIST
fi
# Block sync
$IPT -A INPUT -i ${PUB_IF} -p tcp ! --syn -m state --state NEW -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "Drop Sync"
$IPT -A INPUT -i ${PUB_IF} -p tcp ! --syn -m state --state NEW -j DROP
# Block Fragments
$IPT -A INPUT -i ${PUB_IF} -f -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "Fragments Packets"
$IPT -A INPUT -i ${PUB_IF} -f -j DROP
# Block bad stuff
$IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL FIN,URG,PSH -j DROP
$IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL ALL -j DROP
$IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL NONE -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "NULL Packets"
$IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL NONE -j DROP # NULL packets
$IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags SYN,RST SYN,RST -j DROP
$IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags SYN,FIN SYN,FIN -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "XMAS Packets"
$IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags SYN,FIN SYN,FIN -j DROP #XMAS
$IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags FIN,ACK FIN -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "Fin Packets Scan"
$IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags FIN,ACK FIN -j DROP # FIN packet scans
$IPT -A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL SYN,RST,ACK,FIN,URG -j DROP
# Allow full outgoing connection but no incomming stuff
$IPT -A INPUT -i ${PUB_IF} -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPT -A OUTPUT -o ${PUB_IF} -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
# Allow ssh
$IPT -A INPUT -i ${PUB_IF} -p tcp --destination-port 22 -j ACCEPT
# Allow http / https (open port 80 / 443)
$IPT -A INPUT -i ${PUB_IF} -p tcp --destination-port 80 -j ACCEPT
#$IPT -A INPUT -o ${PUB_IF} -p tcp --destination-port 443 -j ACCEPT
# allow incomming ICMP ping pong stuff
$IPT -A INPUT -i ${PUB_IF} -p icmp --icmp-type 8 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
#$IPT -A OUTPUT -o ${PUB_IF} -p icmp --icmp-type 0 -m state --state ESTABLISHED,RELATED -j ACCEPT
# Allow port 53 tcp/udp (DNS Server)
$IPT -A INPUT -i ${PUB_IF} -p udp --dport 53 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
#$IPT -A OUTPUT -o ${PUB_IF} -p udp --sport 53 -m state --state ESTABLISHED,RELATED -j ACCEPT
$IPT -A INPUT -i ${PUB_IF} -p tcp --destination-port 53 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
#$IPT -A OUTPUT -o ${PUB_IF} -p tcp --sport 53 -m state --state ESTABLISHED,RELATED -j ACCEPT
# Open port 110 (pop3) / 143
$IPT -A INPUT -i ${PUB_IF} -p tcp --destination-port 110 -j ACCEPT
$IPT -A INPUT -i ${PUB_IF} -p tcp --destination-port 143 -j ACCEPT
##### Add your rules below ######
#
#
##### END your rules ############
# Do not log smb/windows sharing packets - too much logging
$IPT -A INPUT -p tcp -i ${PUB_IF} --dport 137:139 -j REJECT
$IPT -A INPUT -p udp -i ${PUB_IF} --dport 137:139 -j REJECT
# log everything else and drop
$IPT -A INPUT -j LOG
$IPT -A FORWARD -j LOG
$IPT -A INPUT -j DROP
exit 0
Authors www.cybercity.biz
